100W LED Beam Moving‑Head

100W Sharp Beam Moving‑Head,16‑Bit Precision 100W Beam Moving‑Head,Bi‑Directional Prism Beam Light,LCD Menu For Indoor Stage Performance

This 100w led beam moving head is compact sharp‑beam moving‑head fixture built for touring rental crews, wedding technicians and global rental fleets. Rated max 150W total power draw, it adopts single high‑brightness 100W LED beam light source. It comes with 16‑bit electronic position correction for 540‑degree pan and 270‑degree tilt. Optical assembly includes 13‑color plus open color wheel,11 static gobos plus open,two bi‑directional rotating prisms and independent 6‑color effect chip. Two switchable DMX channel personalities:6CH /19CH. It supports 0‑100% smooth dimming and adjustable 0‑20Hz strobe frequency. Working modes include DMX512, MASTER‑SLAVE, AUTO‑RUN. Local LCD display supports complete menu setup. IP20 rating, AC100‑240V universal mains input for indoor‑only deployment.

Many Touring Rental Technicians And Wedding Lighting Programmers Encounter Real‑world B‑end Pain‑points. Plenty of entry‑level beam moving‑heads lack 16‑bit electronic position correction. Motor stepping errors will cause pattern drift during long‑time continuous show running, requiring frequent manual readjustment on site. Many compact beam fixtures only supply single DMX channel mode. Operators cannot choose between address‑saving simple preset playback and full‑featured fine‑tuning for complex programmed shows. Some competing beam units only carry single‑prism assembly, limiting available kaleidoscopic visual layers for party and concert atmosphere building. The 100w led beam moving head Solves Sharp‑beam Projection Lighting Requirements With Dual‑DMX‑Personality Setting,16‑bit Motion Correction And Dual‑prism Optical Kit For Concert,Wedding‑banquet And Nightclub Performance Workflows.shop‑category‑led‑moving‑head‑fixtures

Optical & Mechanical Highlights Of The 100W Led Beam Moving Head

At Optical Core, The 100w led beam moving head Uses Dedicated 100W High‑brightness Beam LED As Primary Light Engine. Its integrated optical system contains 13‑position color wheel,11 static gobo patterns,two independent bi‑directional rotating prisms plus separate 6‑color effect chip. It delivers sharp aerial beam traces, crisp gobo pattern projection and multi‑facet kaleidoscope overlay effects. Built‑in 16‑bit electronic correction effectively compensates pan‑tilt stepping deviation, maintaining stable pattern positioning over long event hours. 0‑100% linear dimming and 0‑20Hz adjustable strobe further expand scene creation possibilities for both soft wedding ambiance and high‑energy club dance segments.

This Unit Is IP20 And Strictly Intended For Dry Indoor‑Only Deployment. Overhead Truss Installation Needs Secondary Anti‑Fall Safety Rope For Fall‑Prevention Protection. Wide AC100‑240V Input Fits Worldwide Indoor Venue Power‑supply Standards.

Control & Field Deployment For The 100W Led Beam Moving Head

Two Selectable DMX Channel Personalities Balance Fast On‑Site Commissioning And Advanced Creative Programming. Simplified 6‑Channel Minimizes DMX Address Consumption For Quick Plug‑and‑play banquet setup. Full‑featured 19‑Channel Unlocks Complete Granular Tuning For Prism Rotation,gobo selection,color wheel,strobe and high‑precision pan‑tilt motion values. Beyond DMX512 Console‑driven Workflow, MASTER‑SLAVE Linkage Achieves Synchronized Multi‑unit effect output. AUTO‑RUN Cycles internal preset sequences without external lighting controller. Onboard LCD display offers intuitive local parameter modification. Standard XLR‑3P signal ports simplify multi‑unit daisy‑chain wiring layout.

For Rental‑house Beam‑moving‑head‑fixture Inventory Expansion And Concert‑wedding‑nightclub‑venue‑upgrade‑projects, This 100w led beam moving head Delivers Accurate Sharp‑beam Projection Visuals,Dual‑profile DMX Mapping And Drift‑resistant 16‑bit Motion Control. It Supplies B‑end Lighting Professionals A Reliable Compact Beam‑projection Solution For Concert,Wedding‑banquet And Nightclub Indoor Productions.

Input power: AC100-240V 50/60 Hz
Power consumption:150W
LED: 1*100W LED
DMX channel: 6/19 channels
Pan scan: 540°(16bit) Electric correction
Tilt scan: 270° (16bit) Electric correction
Color wheel: 13 colors+open
Static Gobo: 11 gobos+open
Effect Wheel: two Effect prism,one Rotation 16- prism,one Rotation 8 prism effect move ，
Bi-directional rotation
Color chips: 1 colorful chip ( 6 color )
Control mode: DMX512/Master-Slave/Auto run
Dimmer: 0- 100 %
Strobe: 0-20 HZ
Display: LCD display

Q1: LED specification and total power consumption?

A1:Single 100W high‑power beam LED source;max 150W total power for indoor‑only operation.

Q2: Pan‑tilt range and motion‑correction feature?

A2:540° pan and 270° tilt with built‑in 16‑bit electronic position correction.

Q3: What optical components and built‑in effects are equipped?

A3:13‑color color wheel,11 static gobos,two bi‑directional rotating prisms and 6‑color effect chip.

Q4: DMX‑channel selections and available operating modes?

A4:Switchable 6CH /19CH DMX personalities;DMX512,MASTER‑SLAVE,AUTO‑RUN control modes.

Q5: Practical difference between 6‑channel and 19‑channel DMX setting?

A5:6CH reduces DMX address count for quick deployment;19CH unlock full granular tuning for prism,gobo,color and movement parameters.

Q6: What adjustments can operators finish via onboard LCD display?

A6:DMX address setting,channel‑mode switching,pan‑tilt invert,motor offset calibration and factory reset.

Q7: Which mains‑voltage fits worldwide indoor venue power grids?

A7:Wide‑range AC100‑240V universal input compatible for multi‑region indoor venue power supplies.

Q8: Important safety notes for overhead truss rigging?

A8:IP20 indoor‑only deployment;truss suspension must use secondary anti‑fall safety rope for hazard prevention.