High‑Power Class 4 30W RGB Animation Laser Projector, IP61, >30KPPS Scanner, DMX512 ILDA RJ45 Control for Stage Club & Outdoor Landscape Light Show

Commercial Grade Animation Laser Projector, DB25 & RJ45 ILDA Interface, 10000‑Hour Laser Lifespan for European & US Event Rental Installations

This high‑power 30W RGB animation laser projector is professional Class 4 laser lighting hardware for entertainment venues, live‑stage performances and large‑scale light‑show projects across Europe and the United States. Designed for rental operators and permanent‑installation integrators, it delivers stunning animated graphic and beam effects while prioritizing stability and operational safety.

Its three‑layer independent housing delivers IP61‑grade protection. The fully‑sealed top optical layer blocks dust and lampblack. The middle layer uses large radiators and high‑speed cooling fans for effective heat dissipation. The bottom layer houses all electrical parts, separating heat from precise optical assemblies. This structure guarantees stable indoor performance within‑30 °C to 40 °C, fitting cold‑climate Nordic indoor venues and warm‑climate southern‑European sites.

It adopts 30KHz analog RGB laser modulation with linear brightness dimming on red, green and blue channels. Operators can smoothly adjust color intensity to create layered animated patterns and beam displays. The laser source offers more than 10000‑hour working lifespan, reducing component‑replacement costs for heavy‑use rental and fixed commercial installations.

Equipped with premium high‑speed optical scanner, it achieves >30KPPS ILDA performance at 8‑degree angle and supports a maximum scanning angle up to 60 degrees. High‑quality scanner mirrors ensure precise pattern reproduction and reliable long‑hour operation, preventing image distortion with reasonable parameter settings.

Multiple operation modes satisfy diverse site demands: DMX512 console control, ILDA PC software control, TF‑card playback for .ild animation files, sound‑active trigger and auto‑play built‑in programs. Hardware interfaces cover 3‑pin XLR DMX, DB25‑ILDA and RJ45‑ILDA ports. The RJ45‑ILDA interface supports 300‑meter signal transmission with zero attenuation, simplifying cabling for large‑scale shows. The optional Pangolin FB4 control system unlocks advanced programming for complex laser performances.

Complete intelligent safety features mitigate risks of high‑power Class 4 laser. Single‑beam protection, physical key lock, scanner‑failure auto‑shutdown and signal‑loss laser cutoff stop dangerous static beam output. Suited for nightclubs, concert stages and landmark light events, this animation laser projector is a solid lighting solution for professional installers and rental companies throughout Europe and North America。

Features
1. High power laser with dust-proof and anti-lampblack design. The housing is three independent layer structure design which can make the laser system more stable. Top layer is optical floor without any interface. It is sealed completely. Middle layer is big radiator layer with high speed fan to blow the heat away. The bottom floor is electrical layer.
The whole projector reaches IP61 protection level.(Protection against dust and lampblack, water drop to the shell has no impact).
2. Full pure laser with more stable performance and longer working life. It can work properly between -30°C and 40°C.
3. Made of analog laser modulation. Users can dimmer the laser brightness linearly to makes the laser light more colorful.
4. Operation interface: LCD display.
5. TF Card storage builds in program and downloading program.
6. Safety Feature: Single beam protection system (ON and OFF selection choice. It is very important to have these safety function for high power laser), key lock.
7. Safety intelligent: PC control mode will shut off laser automatically without trigger signal. The scanner failure protection will shut off the laser automatically, so as to avoid the single beam coming out.
8. Applicable for clubs, stage show, outdoor landscape lighting show, outdoor event, etc.
Warning: Don’t scan to the crowd and don’t project a single beam to the aircraft flight route!!！

Technical Specification
1.Voltage: AC90~250V/AC, 50HZ/60HZ，max consumption power: 600W
2.Laser module: RGB analog modulate, 30KHZ frequency
Red laser, 8W, wavelength 638nm
Green laser, 8W, wavelength 525nm
Blue laser, 14W, wavelength 440nm
3.Beam Diameter<7.0*5.5mm, Divergence<1.3mrad
4.Laser life: >10000 hours
5.Laser level: Class 4 laser
6.Waterproof Level: IP61
7.Work Environment: Indoor, -30 °C –40 °C
8.Scanner: The highest quality of optical scanner, high speed and high precision, high stability and long life design.
>30KPPS ILDA @8°. Max scanning angle is 60°. Signal input voltage ±5V
Mirror 12*14mm/X and 20*10mm/Y, maximum accommodate laser spot: 7 (W)*8(H) mm
9.Working Modes: PC Control, DMX512, PRG(TF card program), ILD(TF card program), Sound Active, AUTO,
Option: PANGOLIN FB4 control system, additional SFS single-point protection function
10.TF card play file format: supporting standard ILDA file which is with “.ild “.
11.Interface: 3 pins XLR jack for DMX;DB25-ILDA interface for PC control, RJ45-ILDA interface for PC control (RJ45 cat cable is more convenient to get and wire than ILDA cable. There is no signal attenuation even after 300 meters transmission in the experiments)
12.Machine dimension:430(L)*300(W)*230(H)mm
13.Net Weight: 22.8

Q1: What is the working temperature range of this RGB animation laser projector?

A1: It works stably from‑30 °C to 40 °C, adapting to cold‑climate indoor venues in Northern Europe and high‑temperature summer conditions.

Q2: What control interfaces does this laser fixture support?

A2: It includes 3‑pin XLR DMX512, DB25‑ILDA and RJ45‑ILDA ports; RJ45 supports up to 300‑meter signal transmission without attenuation.

Q3: Can it play laser animation programs without connecting to a PC?

A3: Yes. It supports .ild format program playback via TF card under PRG and ILD modes without computer control.

Q4: What safety protection features are built‑into this high‑power laser projector?

A4: It has single‑beam protection, key lock, scanner failure auto‑shutoff and trigger‑signal loss laser cut‑off functions for operation safety.

Q5: What is the scanning performance of the optical scanner?

A5: The high‑precision scanner reaches over 30KPPS at 8° ILDA, with a maximum scanning angle of 60 degrees for wide‑area effect coverage.

Q6: Is the Pangolin FB4 control system included as standard accessory?

A6: FB4 is an optional upgrade; the standard unit runs on DMX512, ILDA and TF‑card program modes.

Q7: What is the expected service life of the laser light source?

A7: The RGB laser module delivers more than 10000‑hours service life to lower replacement and maintenance frequency for commercial projects.

Q8: Can this laser projector be used for direct audience scanning?

A8: It is Class 4 laser equipment. Professional laser‑safety assessment must be completed before any audience‑scanning application to comply with local European and US regulations.