10W RGB Full Color Animation Laser Projector 40KPPS

10W Stage RGB Animation Laser Projector,ILDA PC‑Control,Auto Signal‑Loss Laser Shut‑Off Safety System

This 10w diode solid state rgb animation laser projector is compact professional indoor laser‑show fixture built for nightclubs, disco bars, KTV venues and global touring‑rental fleets. It adopts direct‑output diode solid‑state laser source with red 3000mW@638nm, green 3000mW@520nm and blue 4000mW@450nm, summing up to total 10‑watt RGB laser optical output and supports analog linear laser‑brightness dimming. Equipped with 40KPPS high‑speed galvo scanner at ±30‑degree scanning angle, beam parameter: beam diameter <5mm, divergence <1.5mrad. Two‑tier dust‑proof compact housing separates optical‑electric modules and large heat‑sink cooling unit, enabling stable operation under‑3℃‑50℃ ambient‑temperature range. Multiple control options include ILDA PC‑control, 18‑CH /25‑CH DMX512, master‑slave synchronization, sound‑active trigger and auto‑run built‑in shows. Integrated multi‑layer safety hardware: switchable single‑beam protection system, laser key lock, remote interlock circuit and automatic laser shut‑off upon trigger‑signal loss.

Many rental operators and entertainment‑venue integrators face common pain‑points when selecting animation laser projectors: traditional gas‑tube lasers suffer short service‑life, many low‑cost laser units lack complete safety interlock circuits and struggle with heat accumulation under continuous‑show operation. The 10w diode solid‑state rgb animation laser projector addresses those practical industry‑requirements for indoor‑entertainment venues and mobile rental‑event workflows. shop‑category/laser‑projectors

Optical & Housing Advantages of the 10W Diode Solid‑State RGB Animation Laser Projector

At optical core, the 10w diode solid‑state rgb animation laser projector adopts direct‑emitting diode solid‑state laser architecture, eliminating fragile gas‑laser‑tube components for enhanced stability and extended service‑life. Combined RGB laser diodes deliver total 10‑watt optical output: red 3000mW at 638nm, green 3000mW at 520nm and blue 4000mW at 450nm. Analog‑modulation enables linear brightness‑dimming, generating smooth variable‑colour animated‑beam and graphic visuals. The 40KPPS high‑speed galvo scanning‑system provides ±30‑degree scanning angle; beam‑diameter below 5mm and beam‑divergence less than 1.5mrad produce sharp clean laser graphics and aerial‑beam effects under smoke‑filled indoor‑venue environments.

Its proprietary two‑tier mechanical housing‑design separates functional modules. The dust‑proof upper‑tier houses delicate optical and electronic assemblies to cut routine maintenance workload. The bottom‑tier integrates large‑volume heat‑sink plus high‑speed forced‑air‑fan cooling system, transferring internal heat efficiently and supporting reliable continuous‑run performance across‑3℃‑50℃ wide ambient‑temperature conditions. This mechanical layout effectively lowers unexpected field‑failure risk for heavy‑use rental‑stock equipment.

Control & Safety‑Protection for the 10W Diode Solid‑State RGB Animation Laser Projector

Multiple flexible control‑solutions satisfy different‑level show‑programming‑demands. It fully follows ILDA laser‑display standard, allowing PC‑driven custom‑graphic laser‑shows using mainstream ILDA‑compatible laser‑show software. Two DMX channel options:18‑channel and 25‑channel‑modes integrate the laser projector into standard DMX lighting‑console cue stacks. Beyond console‑control, master‑slave multi‑unit synchronization, sound‑active audio‑triggered‑effects and auto‑run pre‑programmed laser‑shows support standalone‑operation without external lighting controller.

Safety‑design is non‑negotiable for high‑power stage‑laser hardware. This unit includes switchable single‑beam‑protection function, physical laser‑emission key‑lock, remote‑interlock emergency‑shutdown‑circuit, plus intelligent automatic laser‑shut‑off upon trigger‑signal loss, preventing hazardous static single‑beam output caused by scanner or signal‑system faults.

For rental‑house inventory‑updating and nightclub‑bar fixed‑installation‑projects, this 10‑watt diode‑based animation laser projector merges stable optical‑performance, effective thermal‑management, multi‑protocol‑control and comprehensive built‑in laser‑safety‑mechanisms. It offers B‑end lighting professionals dependable laser‑show‑hardware for disco, pub, KTV and indoor‑party entertainment‑event deployments.

◆Features:
1. Full pure diode RGB laser with more stable performance and longer working life. Diode solid-state (DSS) laser is that when power on, the diode will have laser output directly. The working temperature is -3°- 50°.
2. Two floors designs, more compacted and much lighter.
1) Top floor: Optical and electric components. Dust proof designs, no maintenance costs. Electric components on the top floor, easy to install and replace. The heat is transmitted to the heat sink.
2) Bottom floor: big heat sink and power floor. The high speed fans will blow away the heat and keep the machine in good working temperature.
3. RGB beam diameter and divergence: <5mm, <1.5mrad
4. Made of analog laser modulation. Users can dimmer the laser brightness linearly to makes the laser light more colorful.
◆Laser Power:
AL10RGB: Red@3000mW 638nm, Green@3000mW 520nm, Blue@4000mW 450nm
◆Scanner: 40KPPS,±30°
◆Play Mode:
AL10RGB: PC Control (ILDA Output/Input)，DMX512 (18 25channels), Sound Active, AUTO, Master/Slave
◆PC control: Compatible ILDA laser show software with ILDA interface. Use electronic switches to convert full ILDA signal.
◆Safety configure: Single Beam Protection System(can switch ON or OFF; single beam protection system is very important system for high power laser lights), laser ON-OFF switch, laser remote interlock, flying rings bolt.
◆Safety intelligent: Automatically identify ILDA or built-in program mode. Master/slave mode, DMX512 and PC control mode, will shut off laser automatically without trigger signal. The scanner failure protection will shut off the laser signal , so as to avoid the single beam coming out.
◆Power Supply: 100~250V, 50/60HZ, 100W
◆Applicable for Disco, Clubs, KTV, Pub, Bar, family party, etc.

Q1: What laser‑source configuration and total optical laser‑output power?

A1: Diode solid‑state RGB laser:Red3000mW@638nm,Green3000mW@520nm,Blue4000mW@450nm; total optical laser power reaches 10W.

Q2: What scanner performance and allowable working‑temperature range?

A2: 40KPPS high‑speed galvo scanner with ±30° scan angle; operating‑temperature‑range‑3℃‑50℃.

Q3: What main available control modes and DMX channel profiles?

A3: ILDA PC‑control,DMX512(18CH /25CH),master‑slave,sound‑active,auto‑run built‑in laser‑show programs.

Q4: What analog‑modulation function can this animation laser projector achieve?

A4: It supports analog laser‑brightness linear dimming for richer variable‑colour animated laser‑show visuals.

Q5: What built‑in critical laser‑safety hardware features?

A5: Switchable single‑beam‑protection system,laser physical key‑lock,remote‑interlock,auto laser shut‑off when trigger‑signal is lost.

Q6: What practical benefit comes from this fixture’s two‑tier housing‑structure?

A6: Dust‑proof upper‑tier protects optical‑electric assemblies; bottom‑tier large‑heat‑sink cooling ensures stable long‑hour runtime.

Q7: What software compatibility for ILDA PC‑control working mode?

A7: Fully compatible with mainstream ILDA‑standard laser‑show software via standard ILDA signal interface.

Q8: Which application‑scenarios fit this 10W animation laser projector best?

A8: Optimized for disco,nightclub,bar,KTV,pub and private‑party indoor entertainment‑venue laser‑show productions.