10‑Head Red Laser Bar Light,10×100mW Beams

10‑Head Red Laser Bar Light,Low‑Divergence Beam Array,13‑CH DMX512,Sound‑Active Auto for Stage Rental

This 10 head red laser bar light is a professional indoor laser‑bar fixture engineered for discos, nightclubs, KTV lounges, pubs and global touring‑rental fleets. It integrates ten 100mW red laser diodes at 635nm into one dust‑proof chassis, each beam adjustable on the X/Y axes for a perfectly parallel 10cm‑spaced array. It supports 13‑channel DMX512, sound‑active, auto, manual and master‑slave modes, with dozens of preprogrammed effects and individual‑diode ON/OFF control. Safety hardware includes a laser key switch and remote interlock, and wide‑range AC90‑250V input suits global power grids.

For rental operators and venue integrators supplying nightclubs, bars and KTV lounges, sourcing a dependable multi‑beam red laser bar is often harder than it looks. Many laser bar products on the market suffer visible beam divergence on long throws, misaligned parallel beams, brittle housings that admit dust, or a shortage of genuinely usable built‑in effect programs. The 10‑head red laser bar light tackles these common pain points with an engineering‑led design tuned for everyday indoor entertainment environments and mobile touring‑rental workloads. shop‑category/red‑laser‑bar‑lights

Beam Precision of the 10‑Head Red Laser Bar Light

At the heart of the 10‑head red laser bar light sit ten discrete red laser diodes, each rated 100mW at a 635nm wavelength. Because a 1mW output at 635nm delivers roughly the same perceived brightness as a 3mW red laser at 650nm, this unit produces a notably bright beam set without drawing excessive power. Each beam holds a divergence below 0.8mrad and a compact spot size, so even when projected across a long venue floor or up to a distant ceiling, the beam spots stay tight and well defined instead of spreading into soft, fuzzy patches.

Every individual laser head can be adjusted independently through the X/Y screws on the front panel. This lets a technician fine‑tune all ten beams into a clean, fully parallel array with an even 10cm spacing between adjacent heads, eliminating the skewed or fanning beam patterns that cheap laser bars often show. The result is a symmetrical multi‑beam wall that photographs well and reads clearly on stage, which matters for DJ rooms and branded KTV interiors where visual polish is part of the experience.

Build & Mounting Advantages of the 10‑Head Red Laser Bar Light

Reliability counts when equipment moves between venues week after week. The 10‑head red laser bar light uses a dust‑proof protective housing that keeps fine particles away from the optical surfaces, lowering cleaning frequency and protecting laser diode output over long rental cycles. A single strong bracket design supports two separate installation methods: top‑panel mounting for truss or ceiling rigs, and rear‑panel mounting for compact vertical installations. Giving crews both options removes the need to carry extra conversion hardware on tour.

The unit ships with dozens of preprogrammed effects stored in memory, including all‑laser‑on states, strobe, positive and negative direction flowing effects, and multiple chase patterns. Because each laser diode can be switched on or off individually through a DMX controller, designers are not locked into factory presets. They can build custom beam combinations, isolated single‑beam highlights and choreographed sequences that match a specific song or a particular show moment.

Control & Safety for the 10‑Head Red Laser Bar Light

Multiple control paths cover different workflow needs. The 10‑head red laser bar light accepts standard DMX512 through its 13‑channel profile, supporting full individual‑head dimming and brightness adjustment. Beyond console operation, sound‑active mode drives the patterns from music rhythm via the internal microphone, auto mode cycles built‑in programs without external control, manual mode lets an operator pick effects locally, and master‑slave mode links multiple units into one synchronized rig.

Safety hardware is essential on any laser product. This fixture includes a physical laser ON‑OFF key switch, a remote interlock terminal that must be closed before the laser will emit, and flying‑ring bolts for secure rigging. It runs on wide‑range AC90‑250V, 50/60Hz input with a rated draw of 50‑100W. The chassis measures 1000×160×80mm and weighs 8.5‑10.0kg. Based on [laser display technology], the multi‑mode control and robust build make the 10‑head red laser bar light a practical, low‑maintenance addition to both rental inventories and fixed bar‑club‑KTV effect systems at a competitive price point.

10 head laser bar features:
1) Small beam diameter and divergence. Even projecting to a long distance, the beam spots are still ideal.
2) 10 laser beam parallel effects, distance between each beam is 10cm.Each beam is adjusted independently and beam X/Y position is adjusted in front panel; so you can get beams parallel totally.
3) Single strong bracket designs and two installation mounted ways(Top panel and rear panel installation), offering more flexible installations choice for customers.
4) Dust proof designs.
5) Lots of laser effects, such as Laser on, strobe, positive and negative direction flowing effects, chasing effects, etc
6) Play Mode: Sound active, Auto, Manual mode (choosing the effects), DMX 512, Master /Slave.
7) Tens of effects preprogrammed inside, customers can choose any of them and control each laser diode ON/OFF by DMX controller.
Laser:
P10R100+: 10PCS * 100mW red laser @635nm(the brightness of 1mW red laser @635nm equals 3mW red laser @650nm) , Divergence:<0.8mrad.
Play Mode: Sound Active, AUTO, DMX512 (13 channels), Manual, Master/Slave
Safety Configure: Laser ON-OFF key switch, Laser remote interlock, Flying rings bolt
Power Supply: 90~250V, 50/60HZ, 50~100W
Size: 1000*160*80mm
Weight: 8.5~10.0Kg
Applicable for Disco, Clubs, KTV, Pub, Bar, family party, etc

Q1: How many laser beams and what power does each head provide?

A1: Ten red laser heads, each 100mW at 635nm; at this wavelength 1mW delivers brightness comparable to 3mW of a 650nm red laser.

Q2: What beam divergence and alignment capability are built into this bar?

A2: Divergence below 0.8mrad; every head is independently adjustable on X/Y axes to form a clean parallel array with 10cm spacing.

Q3: What control modes and DMX channel profile are supported?

A3: 13‑channel DMX512, sound‑active, auto, manual, master‑slave; individual laser diode ON/OFF control is available via DMX.

Q4: What kind of built‑in laser effects does this fixture provide?

A4: Dozens of preprogrammed effects including all‑laser‑on, strobe, positive/negative flowing and multiple chase patterns.

Q5: What installation options does this laser bar offer?

A5: A single strong bracket supporting both top‑panel and rear‑panel mounting for flexible truss or vertical rigging.

Q6: What safety devices are included for high‑power laser operation?

A6: Physical laser ON‑OFF key switch, laser remote interlock and flying‑ring bolts for secure rigging.

Q7: What power‑input range and physical dimensions/weight?

A7: AC90‑250V, 50/60Hz, 50‑100W; size 1000×160×80mm, net weight 8.5‑10.0kg.

Q8: Can this unit be used for outdoor laser shows?

A8: Designed for indoor‑use only; avoid moisture, rain and prolonged direct dust exposure.