10‑Head Red Laser + 10 Golden LED Beam Bar,21CH DMX512,IP Dust‑Proof for Disco,Club,KTV & Bar

10×100mW Red Laser + 3W Golden LED Array,Master‑Slave for DJ,Party & Stage Lighting Projects

This 10 head red laser golden led beam bar stage light is professional indoor‑use dual‑effect stage lighting fixture built for discos, clubs, KTV rooms, pubs, bars and family‑party entertainment venues across Europe and North America. Optimized for event‑rental workflows and permanent small‑venue installation, this beam bar combines two independent light sources into one compact housing, delivering rich array‑style visual effects for entertainment operators and lighting contractors.

The fixture integrates ten high‑stability red laser beams with ten 3‑watt golden‑color LED beams. The laser and golden LED effects can run synchronously or asynchronously, and can be combined arbitrarily across laser and LED effect groups. This dual‑source design enables operators to build diverse layered beam visuals: the golden LED can serve as a warm background behind the laser beams or be elevated as the main effect for particular show segments, offering strong creative flexibility.

The red laser source features small beam diameter and ultra‑low 0.8 mrad divergence, maintaining clean, sharp beam spots even when projected across long distances. Each of the ten laser beams can be independently adjusted, and the X‑Y position of every beam is tunable directly on the front panel, allowing operators to achieve fully parallel beam layouts suited to different rigging requirements.

The system also implements gradient‑brightness control on RGB laser effects, with dozens of built‑in laser effects including static laser‑on, strobe, positive‑and‑negative flowing and chasing patterns. Users can select any preset effect and control the ON/OFF status of each individual laser beam and each golden LED via DMX controller.

Multiple working‑modes satisfy diverse on‑site operation requirements. It supports 21‑channel DMX512 console control for fine parameter programming, Sound‑Active music‑triggered playback, AUTO built‑in‑effect auto‑run, Manual single‑effect selection and Master‑Slave multi‑unit synchronization. Under master‑slave mode, multiple beam bars can run synchronously through standard XLR cables without extra controllers.

Complete safety configurations are equipped, including physical laser ON‑OFF key‑switch, laser remote interlock interface and flying‑ring bolt for secure truss hoisting. The dust‑proof housing structure protects internal optical modules from contamination and extends the whole‑unit service life for frequent venue usage.

Running on universal AC90‑250V 50/60Hz power input with rated power of 50‑100W, this beam bar is compatible with mainstream power‑grid standards of European countries and the United States. It measures 1000×140×60 mm and weighs 7.8‑9.5 Kg. This fixture is strictly for indoor‑only deployment; operators must observe local laser‑safety guidelines. Featuring a unique laser‑plus‑golden‑LED dual‑effect design, low‑divergence beam quality and flexible multi‑mode control, this beam bar is a cost‑effective lighting solution for clubs and entertainment projects throughout Europe and North America.

Features:
1) Arrays combination effects by 10 head laser beams parallel effects and 10 head golden color LED beam effects with 8°divergence. The laser and golden color LED effects can be synchronous or asynchronous, and can be combined in any laser and Led effects.
2) Small laser beam diameter and divergence. Even projecting to a long distance, the beam spots are still ideal.
3)10 laser beam parallel effects, distance between each beam is 10cm.Each beam is adjusted independently and beam X/Y position is adjusted in front panel; so you can get beams parallel totally.
4) Golden color LED effects can be used as the background effects of laser beam, strong function and can be used as main effects as well.
5) Dust proof designs, much longer working life.
6) Gradient brightness on RGB laser effects, lots of laser effects, such as Laser on, strobe, positive and negative direction flowing effects, chasing effects, etc.
7) Play Mode: Sound active, Auto, Manual mode (choosing single effects), DMX 512, and Master/Slave.
8) Tens of effects preprogrammed inside, customers can choose any of them and control each laser beam and golden color LED ON/OFF by DMX controller.
Laser: High stable laser diodes with small beam divergence.
P15R100+: 100mW red laser*10PCS, wavelength 638nm (the brightness of 1mW red laser @638nm equals 3mW red laser @650nm), divergence: <0.8mrad
LED: 3W golden color LED*10PCS, wavelength 580~590nm
Play Mode: Sound Active, AUTO, DMX512 (21 channels), Manual, Master/Slave
Safety Configure: Laser ON-OFF key switch, Laser remote interlock, Flying rings bolt
Power Supply: 90~250V, 50/60HZ, 50~100W
Size: 1000*140*60mm
Weight: 7.8~9.5Kg
Applicable for Disco, Clubs, KTV, Pub, bar, family party, etc.

Q1: What dual‑light‑source effects does this beam bar combine?

A1: It combines ten red laser beams with ten golden‑color LED beams, with synch or asynch operation.

Q2: Can I freely combine the laser and LED effects?

A2: Yes, laser and golden LED effects can be synchronous or asynchronous, enabling unlimited effect mixing.

Q3: How are the beam spots for long‑distance projection?

A3: Red laser uses small beam diameter with 0.8mrad divergence, keeping clean spots even at long throw distances.

Q4: Can I adjust the beam layout to get parallel beams?

A4: Yes, each beam is independently adjusted via front‑panel X‑Y position control for perfect parallelism.

Q5: What control modes and DMX resources does this beam bar support?

A5: 21‑channel DMX512, Sound‑Active, AUTO, Manual single‑effect mode and Master‑Slave synchronization.

Q6: How many pre‑programmed effects are built‑inside for quick shows?

A6: Tens of pre‑programmed effects; each laser beam and golden LED can be switched ON/OFF via DMX.

Q7: What benefit does the dust‑proof design provide for venue use?

A7: It resists dust contamination, extends working life and reduces routine‑maintenance workload.

Q8: What power‑supply and physical parameters fit global indoor deployment?

A8: AC90‑250V 50/60Hz,50‑100W; size 100014060mm, net weight 7.8‑9.5Kg.