100W Outdoor Laser Beam Moving Head

100W CMY Laser Moving Head,Outdoor Laser Beam Fixture,IP65 Laser Beam Moving Head,CMY 1.2° Beam 360° Endless Pan RDM For Festival Concert Night Lighting

Touring rental managers and festival lighting designers require an IP‑rated head that punches visible aerial beams across wide outdoor audiences, and this 100w outdoor laser beam moving head pairs laser output with full CMY color control for open‑air productions. It drives a 100W laser engine alongside 36 pieces of 0.5W RGB 3‑in‑1 LED through a 126mm lens for a tight 1.2° beam. Full CMY mixing adds cyan, yellow and magenta to 15 colors plus open, with half‑color mode and variable‑speed rainbow. 29 static gobos, dual bidirectional prisms,0‑100% linear focus and frost,1‑25Hz strobe, IP65 housing,360° endless pan‑tilt, DMX512 with RDM on 33/41 channels.

Outdoor Rig Owners Often Hit Practical Limits With Beam Heads. Basic LED beams fade over long throws, so beams lose definition at the back of a festival field. Wheel‑only color systems snap between hues instead of gliding through rich tones. Single‑prism designs leave impossible gaps in stacked aerial geometry. Fixtures without IP sealing cannot survive sudden rain on open‑air sites. Poorly driven sources also flicker once cameras are in the field.shop-category-laser-beam-moving-head-stage-lighting-equipment

Beam And Color Capability Of The 100W Outdoor Laser Beam Moving Head

The 100W Outdoor Laser Beam Moving Head keeps beam definition intact across long outdoor throws. A 100W laser engine works with thirty‑six 0.5W RGB 3‑in‑1 LEDs, and the 126mm lens shapes a tight 1.2° column with 20000‑hour rated life. Full CMY mixing runs alongside a 15‑color wheel plus open, adding half‑color mode and a variable‑speed bidirectional rainbow for expressive color journeys.

Twenty‑nine static gobos provide pattern variety, while 6‑linear and 8‑facet prisms rotate both ways at variable speed for layered geometry. Focus and frost travel linearly from 0 to 100%, and strobe adjusts from 1‑25Hz. LED frequency is tunable from 600Hz to 24000Hz, so capture stays clean. IP65 housing, aluminum die‑cast body, end‑less 360° pan‑tilt at 16‑bit precision, plus DMX512 with RDM on 33/41 channels complete the build.

Open‑Air Show Deployment Of The 100W Outdoor Laser Beam Moving Head

Programmers exploit endless pan‑tilt to draw sweeping beam fans across festival crowds without cable snags. CMY mixing lets color evolve continuously through a whole set instead of hard cuts. Dual prisms combine into layered aerial sculpture for peak moments, and linear frost softens into atmospheric glow for quieter sections. Sleep mode engages automatically after DMX loss, cutting idle wear during load‑out. Firmware updates travel over the DMX line, so fleet servicing stays simple. Wide‑voltage input handles differing mains wherever the tour lands.

Rental managers and outdoor show designers obtain a sealed, high‑contrast beam head. CMY color control, dual prisms and a laser‑driven 1.2° column deliver dependable aerial impact for festivals, touring concerts and scenic night productions.

Light Source:
Input Voltage: AC110-240V 50 60Hz
Light Source: 100W Laser Engine 36pcs 0.5W RGB 3in1 LED
Power Consumption: 160W
Life Span: 20000H
Optical:
LEN Diameter: 126mm
Beam Angle: 1.2 degree
Controls:
Control Mode: DMX 512 Master/Slave Work Auto Sound Activated Support RDM control
DMX Channels: 33/41 DMX Channels
DMX Connector: 3-PIN IP XLR IN OUT
Effect:
Color 1: 15 colors Magenta Open half-color mode available Variable direction rainbow effect with speed adjustable
Color 2: Cyan
Color 3: Yellow
Static Gobo: 29 static Gobos Open
Prism: 6-linear Prism and 8-facet Prism with bi-directional rotation at variable speed
Focus: 0 100% Linear Focus
Frost: 0 100% linear Frost
Strobe: shutter speed adjustable from 1 25Hz
LED Frequency: 600Hz 24000Hz Adjustable
Construction:
Movement: 360 degree endless pan tilt movement 16 bit smooth and precise resolution for PAN TILT movement
Software update: Easy to update via DMX Connector
Sleep mode: When disconnect DMX the fixture returns to sleep mode automatically
Body Structure: Aluminum Alloy Diecast plastic
Working Environment: -20 to 45 degree
IP Rate: IP65 waterproof grade design
Dimensions:
Product Size: 28×26.8×42.9cm
N.W: 16.95kgs
Packing Size: 54.5×37.5x38cm
G.W: 18.9kgs

Q1: What light‑source combination does this waterproof laser beam head use?
A1: A 100W laser engine paired with thirty‑six 0.5W RGB 3‑in‑1 LEDs; rated life span reaches 20000 hours.

Q2: About beam angle and focus‑frost adjustment?
A2: 126mm lens produces a 1.2° narrow beam; focus and frost both adjustable linearly across 0‑100% of travel.

Q3: How does the CMY color system work with the color wheel?
A3: CMY adds dedicated cyan, yellow and magenta channels to a 15‑color wheel plus open, with half‑color mode and variable‑speed bidirectional rainbow effect.

Q4: What gobo and prism effects can operators combine?
A4: 29 static gobos plus open, with 6‑linear and 8‑facet prisms rotating bidirectionally at variable speed for stacked aerial patterns.

Q5: What control protocols, channel options and update method are supported?
A5: DMX512, master‑slave, auto and sound‑activated modes with RDM;33 or 41 channels; firmware update runs through the DMX connector.

Q6: About pan‑tilt travel, precision and idle behavior?
A6: 360° endless pan and tilt with 16‑bit precise resolution; fixture returns to sleep mode automatically once DMX disconnects.

Q7: What construction and environmental specifications apply?
A7: Aluminum alloy die‑cast plus plastic body, IP65 waterproof design, ‑20°C to 45°C working range,160W power consumption.

Q8: Which live scenarios suit this laser beam moving head best?
A8: Outdoor music festivals, touring venue concerts, theme parks and cultural‑tourism scenic night shows.