10W‑15W IP65 DSS RGB Outdoor Animation Laser Projector,>40KPPS 60°Scanner,FB4‑Option for Outdoor Landscape & Stage Light‑Shows

Analog‑Modulate DSS Outdoor Laser Projector,DMX512 ILDA AUTO Mode for Permanent Outdoor Lighting Projects

This multi power 10w-15w ip65 dss rgb outdoor animation laser projector is Class‑4 professional‑grade laser lighting hardware built for mixed indoor‑outdoor stage performances and large‑scale outdoor landscape lighting projects across Europe and North America. Optimized for permanent outdoor fixed installation and outdoor event‑rental cycles, this fixture features heavy‑duty waterproof construction, reliable DSS solid‑state laser technology and complete EU‑US‑compliant safety features for lighting integrators and rental companies.

It adopts advanced two‑layer independent housing with multi‑waterproof techniques to achieve IP65 protection rating, capable of working steadily under rainy and snowy outdoor conditions. The top layer accommodates optical and electrical assemblies, while the bottom large radiator layer delivers powerful forced‑air convection heat dissipation to keep internal components within safe operating temperature.

Available in 10W and 15W DSS solid‑state RGB laser configurations. Diode directly outputs laser after power‑on. The unit runs reliably within‑30 °C to 40 °C, adapting to cold‑climate Nordic outdoor projects and high‑temperature summer outdoor scenes in southern Europe. Laser service life exceeds 10000 hours to reduce replacement costs for long‑term outdoor installations. It applies analog RGB laser modulation to realize linear brightness dimming for rich, multi‑layered color laser outputs.

Equipped with high‑quality DT40 optical scanner reaching >40KPPS ILDA speed at 8‑degree angle and maximum scanning angle up to 60 degrees. Two power grades come with matched compact beam size and low divergence values, delivering sharp and smooth patterns even over long‑distance projection.

Working modes include ILDA PC control, DMX512 and AUTO built‑in‑effect playback. Pangolin FB4 control system is available as an optional upgrade. Hardware interfaces contain 3‑pin XLR DMX jack and RJ45‑ILDA port; RJ45‑ILDA uses regular CAT5 network cable and supports up to 300‑meter signal transmission without attenuation, simplifying complex outdoor field wiring. Users adjust parameters conveniently via LCD touch‑button operation panel.

Multiple intelligent safety configurations satisfy European and American safety requirements: switchable single‑beam protection system, physical laser key‑lock and laser remote interlock. The projector automatically cuts laser output once scanning motor or control system failure is detected to prevent hazardous static single‑beam output. Different power versions have net weight 13.5‑14.5 Kg with compact dimensions for hoisting installation. Operators must follow local Class‑4 laser safety regulations. Featuring robust IP65 waterproof hardware, flexible multi‑mode control and full safety design, this DSS RGB outdoor laser projector is a reliable lighting solution for outdoor projects throughout Europe and North America.

1. Outdoor Medium power waterproof laser light with IP65 protection levels. Design with multi waterproof technique design for outdoor rainy and snowy days.
2. The housing is two independent layer structure designs which can make the laser system more stable. Top layer is the optical and electrical layer. The bottom floor is a big radiator layer with strong wind convection dissipation.
3. Not only have the basic function interface of operation, but also have the safety functions required by European and American countries.
4. Use diode solid-state laser with more stable performance and longer working life. It can work properly between -30°C to 40°C.
5. Small RGB beam diameter and low divergence to make the beam and patterns smoother and much clearer even in long distance projection.
6. Made of analog laser modulation. Users can dimmer the laser brightness linearly to make the laser light more colorful.
7. Operation interface: LCD display and touch button operation.
8. Safety Features: Single beam protection system, laser key lock and laser remote interlock switch.
9. Safety intelligent: If the scanning motor or control system fails, the scanner failure protection will shut off the laser automatically, so as to avoid the single beam coming out.
11. Applicable for outdoor and indoor stage shows, outdoor landscape lighting shows, outdoor events, etc.

Technical Specification
1.Voltage: AC100~250V/AC, 50HZ/60HZ，max consumption power: 250W
2. Laser specification:
15W:
Red laser 4.4W, wavelength 638nm
Green laser 4.8W, wavelength 520nm
Blue laser 6.5W, wavelength 450nm
Beam Diameter<4.5*6.0(H) mm, Divergence<1.1mrad
10W:
Red laser 3.3W, wavelength 638nm
Green laser 3.6W, wavelength 520nm
Blue laser 4.5W, wavelength 450nm
Beam Diameter<4.0*6.0(H) mm, Divergence<1.3mrad
3. Laser life: >10000 hours
4. Laser level: Class 4 laser
5. Waterproof Level: IP65
6. Work Environment: Outdoors and Indoors, -30 °C to 40 °C
7. Scanner: model DT40
Speed >40KPPS ILDA @8°. Max scanning angle is 60°. Signal input voltage ±5V.
Mirror 7*12mm/X and 7*12mm/Y.
The highest quality of optical scanner, high speed and high precision, high stability and long life design.
8. Working Modes: ILDA(PC control), DMX512, AUTO
Option: PANGOLIN FB4 control system
9. Interface:
3 pins XLR jack for DMX;
RJ45-ILDA interface for PC control (RJ45 cat cable is more convenient to get and wire than ILDA cable. There is no signal attenuation even after 300 meters transmission in the experiments);
RJ45 LAN Agreement for FB4 control, switch expansion interface. (The FB4 model has, the LAN in the original FB4 is automatically blocked).
10. Machine dimension: 370(L)*165(W)*210(H) mm,
11. Net Weight: 13.5Kg/10W 14.5Kg/15W

Q1: What protection standard and housing structure does this laser adopt?

A1: IP65 multi‑waterproof two‑layer housing, adapting to rainy and snowy outdoor environmental conditions.

Q2: What laser power variants are available?

A2: Two power grades:10W and 15W DSS RGB laser with different red‑green‑blue diode combinations.

Q3: What are the core scanner technical parameters?

A3: >40KPPS ILDA @8°, maximum scanning angle 60°, signal input ±5V, model DT40 optical scanner.

Q4: What are beam parameters for 10W and 15W versions?

A4: 10W:beam＜4.06.0mm, divergence＜1.3mrad;15W:beam＜4.56.0mm, divergence＜1.1mrad.

Q5: What control interfaces and optional systems are supported?

A5: 3‑pin XLR DMX, RJ45‑ILDA; RJ45‑ILDA supports 300‑meter transmission; Pangolin FB4 is optional upgrade.

Q6: What safety protection functions are built‑in this Class‑4 laser fixture?

A6: Single‑beam protection, laser key‑lock, remote interlock, auto laser shut‑off for scanner motor failure.

Q7: What working modes and operation interface are available?

A7: ILDA‑PC, DMX512, AUTO mode; human‑friendly LCD touch‑button operation interface.

Q8: What is working‑temperature and laser source lifespan?

A8: Stable‑30℃‑40℃ indoor & outdoor operation; DSS laser source lifespan＞10000 hours.