150W LED Beam Moving‑Head

150W Beam Moving‑Head Light,LED Beam Moving‑Head,16‑Bit Correction Moving‑Head,11 Static Gobos 13‑Color Wheel For Live‑Show Production

This 150w led beam moving head is rental‑grade sharp‑beam moving‑head fixture built for touring rental crews, wedding lighting technicians and global rental fleets. Rated max 150W total power consumption, it is equipped with 13‑position color wheel,11 static gobos plus open and 6+12‑facet rotating honeycomb prism. It offers narrow 3‑degree beam angle, mechanical lens focus and 16‑bit electronic correction for 540° pan and 270° tilt movement.

It adopts 13‑channel DMX control with native RDM remote‑device‑management support. It supports 0‑100% smooth dimming,0‑20Hz adjustable strobe and built‑in overheat‑protection system. Working modes include DMX512, MASTER‑SLAVE, AUTO‑RUN. Local LCD display completes on‑site parameter configuration. IP20 rating, AC100‑240V universal mains input for indoor‑only deployment.

Many Touring Rental Technicians And Wedding Lighting Programmers Encounter Real‑world B‑end pain‑points. Many entry‑level beam moving‑heads lack built‑in RDM remote management. When fixtures are hung high on trusses, crews must climb rigging hardware just to modify DMX addresses or check running status. Some competing beam lights only deliver coarse 8‑bit movement resolution, causing pattern drifting after hours of continuous show playback. Without hardware‑level overheat protection, heavy‑duty long‑hour nightclub operation raises risk of premature component failure.

A number of low‑cost beam units carry only simple single‑facet prism and limited gobo resources, limiting creative aerial‑beam scene building. The 150w led beam moving head Solves Sharp Aerial‑beam Projection Demands With Native RDM Remote‑access,16‑bit Motion Correction And Rich Optical‑kit For Concert,Wedding‑banquet And Nightclub Performance Workflows.shop‑category‑led‑moving‑head‑fixtures

Optical & Mechanical Highlights Of The 150W Led Beam Moving Head

At Optical Core, The 150w led beam moving head Uses Dedicated High‑power Beam LED To Produce Tight 3‑degree Aerial Light Shafts. Its integrated optical assembly includes 13‑position color wheel,11 static gobo patterns and unique 6+12‑facet rotating honeycomb prism for multi‑facet kaleidoscope beam outputs. Mechanical manual‑style focus enables sharp pattern definition for different projection distances. 16‑bit electronic pan‑tilt correction suppresses stepping drift and maintains stable positioning during extended runtime. 0‑100% linear dimming and adjustable 0‑20Hz strobe expand creative options for soft wedding atmosphere and high‑energy club dance segments. Built‑in overheat‑protection circuit monitors internal temperature to avoid damage under heavy rental‑cycle usage.

This Unit Is IP20 And Strictly Intended For Dry Indoor‑Only Deployment. Overhead Truss Installation Needs Secondary Anti‑Fall Safety Rope For Fall‑Prevention Protection. Wide AC100‑240V Input Fits Worldwide Indoor Venue Power‑supply Standards.

Control & Field Deployment For The 150W Led Beam Moving Head

Optimized fixed 13‑channel DMX layout keeps DMX universe address consumption reasonable for multi‑fixture rigs, while retaining full independent tuning for prism rotation,gobo selection,color wheel,strobe and pan‑tilt motion parameters. Integrated RDM protocol empowers technicians to adjust fixture parameters and read device status remotely from lighting console without physical truss access. Beyond DMX512 console‑driven Workflow, MASTER‑SLAVE Linkage Achieves Synchronized Multi‑unit effect output. AUTO‑RUN Cycles internal preset sequences without external lighting controller. Onboard LCD display offers intuitive local parameter modification. Standard XLR‑3P signal ports simplify multi‑unit daisy‑chain wiring layout.

For Rental‑house Beam‑moving‑head‑fixture Inventory Expansion And Concert‑wedding‑nightclub‑venue‑upgrade‑projects, This 150w led beam moving head Delivers Crisp Narrow‑beam Projection Visuals,RDM Remote‑access And Drift‑resistant 16‑bit Motion Control. It Supplies B‑End Lighting Professionals A Compact Touring‑grade Beam‑projection Solution For Concert,Wedding‑banquet And Nightclub Indoor Productions.

Input power:AC100-240V 50/60 Hz
Power consumption :150W
DMX channel:13 channels
Pan scan：540°(16bit) Electric correction
Tilt scan：270° (16bit) Electric correction
Color wheel: one color wheel, 13 kinds of color chips in one color wheel
Static Gobo: 11gobos+open
Color chips：1 colorful chip (7 color )
Beam angle:3 degree
Effect Wheel: one Rotation 6+12-faced honeycomb prism
RDM function
Lens optical system mechanical focus
Control mode:DMX512/Master-Slave/Auto run
Over heat protection
Dimmer : 0- 100 %
Strobe:0-20 HZ
Display:LCD display
WEIGHT&SIZE
N.W: 9.8 KG
G.W: 11 .5KG
Packing size: 48x37x26cm

Q1: Light‑source and total power consumption?

A1:High‑power beam LED;max 150W total power for indoor‑only operation.

Q2: Beam angle,optical components and pan‑tilt specs?

A2:3‑degree narrow beam;13‑color wheel,11 static gobos,6+12‑facet honeycomb prism;540° pan 270° tilt with 16‑bit electronic correction.

Q3: What special control and protection features are integrated?

A3:Native RDM remote management,overheat protection,0‑100% dimming and adjustable 0‑20Hz strobe.

Q4: DMX‑channel selections and available operating modes?

A4:Fixed 13‑channel DMX profile;DMX512,MASTER‑SLAVE,AUTO‑RUN working modes.

Q5: What practical benefits does RDM bring for rigging crews?

A5:RDM allows remote DMX address setting and status reading without climbing truss for high‑mounted fixtures.

Q6: What adjustments can operators finish via onboard LCD display?

A6:DMX address setting,pan‑tilt invert,motor offset calibration,run‑mode selection and factory reset.

Q7: Which mains‑voltage fits worldwide indoor venue power grids?

A7:Wide‑range AC100‑240V universal input compatible for multi‑region indoor venue power supplies.

Q8: Safety reminders for overhead truss mounting?

A8:IP20 indoor‑only deployment;truss suspension must use secondary anti‑fall safety rope for hazard prevention.