150W RGBL Zoom Wash Beam Moving Head Light

150W RGBL Zoom Wash‑Beam Moving Head Light,4°‑48° Fresnel Lens,Fast 16‑Bit Pan‑Tilt,Power Twist Link

This 150W RGBL zoom wash beam moving head light is an IP20 indoor hybrid stage fixture built for theatre houses, nightclubs, corporate events and global touring‑rental fleets. Equipped with high‑quality Fresnel lens optics, it integrates 120W RGBL main LED plus 24 pieces of 5050 RGB ring LEDs. It supports 4°‑48° adjustable zoom, ultra‑fast 16‑bit 540° pan /220° tilt with electric correction. Multiple DMX channel profiles are selectable alongside 0‑100 % electronic dimming and 0‑20Hz electronic shutter. It adopts Power‑Twist power loop‑through and 5‑pin XLR DMX connectors, local LCD menu for onsite setup, trusted by lighting technicians for diverse indoor live productions.

When assembling indoor lighting rigs for nightclubs, corporate events and medium‑sized theatre shows, many buyers seek one‑fixture hybrid solutions that deliver both sharp beam projection and soft wash coverage, without purchasing separate beam‑only and wash‑only moving‑heads. The 150W RGBL zoom wash‑beam moving head light fills this common market demand for rental houses and venue integrators. shop‑category/moving‑head‑stage‑lights

Key Optical Performance of the 150W RGBL Zoom Wash‑Beam Moving Head Light

This hybrid fixture adopts professional Fresnel‑lens optical system. Its primary light source is a 120W RGBL LED chip, paired with surrounding 24‑piece 5050 RGB ring LEDs which add decorative peripheral glow for stage atmosphere building. Continuous 4°‑48° zoom adjustment lets operators toggle from narrow beam spot effects to broad soft wash illumination within seconds, removing the requirement to swap physical lenses onsite.

16‑bit high‑resolution movement forms another core advantage of the 150W RGBL zoom wash‑beam moving head light. Pan covers 540° rotation range while tilt reaches 220°, supported by built‑in electric position correction. This hardware greatly reduces position drift issues that frequently trouble low‑cost moving‑head units during long‑hour live performances. Users get stable repeatable position output for pre‑programmed show cues. 0‑100 % linear electronic dimmer and adjustable 0‑20Hz electronic shutter expand creative possibilities for strobe, pulse and dynamic live‑show transitions.

Control & Connectivity for 150W RGBL Zoom Wash‑Beam Moving Head Light

For system integration, this fixture supports four different DMX channel modes: 20CH‑1, 36CH,108CH and 20CH‑2. Operators are free to pick simplified low‑channel mode for fast setup, or high‑density 108‑channel profile to unlock full ring‑pixel mapping creative potential. It fully follows DMX512 lighting protocol.

Power‑Twist input‑output connector enables safe daisy‑chained power wiring for multi‑fixture rigs, saving large amounts of AC power‑cable stock for rental fleets. Signal connection uses industry‑standard 5‑pin XLR DMX in‑out ports. Rear‑side LCD local control panel allows technicians to set DMX address, switch channel modes and run manual tests, even when lighting console hardware is temporarily unavailable. Rated IP20, this unit is strictly designed for indoor deployment and should never be exposed to rain or heavy humidity. Net weight 8 KG and gross weight 9 KG simplify truss‑load calculation and touring case configuration.

For rental‑house stock updating and permanent venue‑installation projects, the 150W RGBL zoom wash‑beam moving head light combines hybrid beam‑wash optics, decorative ring‑LED effect, precise 16‑bit movement and flexible multi‑channel control, helping B‑end customers cut equipment quantity while still delivering rich visual output for varied indoor live‑event requirements.

Supply voltage: 100-240V, 50/60Hz
Power consumption: 150 W
Wash Beam with Fresnel Lens
1 pcs 120W RGB LLED and 24 pcs 5050 * 0.1WRGB LEDs for ring
With zoom effect
Frost
Channel mode : 20CH-1/36CH/108CH/20CH-2
Very fast pan/tilt movements
LCD display
Beam angle/zoom: 4°-48°
Pan scan: 540°(16bit) Electric correction
Tilt scan: 220° (16bit) Electric correction
Electronic dimmer: 0- 100 %
Electronic shutter: 0- 20 Hz
Power connection: Power Twist In/Out
DMX connection: 5-pin XLR In / Out
Protection class: IP20

Q1: What are main light‑source specifications for this moving‑head fixture?

A1: 120W RGBL main LED plus 24pcs 5050 0.1W RGB ring LEDs, total power consumption reaches 150W.

Q2: What zoom range and pan‑tilt mechanical performance can I expect?

A2: 4°‑48° zoom with Fresnel lens; 540° pan &220° tilt, 16‑bit resolution with electric position correction.

Q3: What DMX channel modes are available for programming?

A3: Four selectable modes:20CH‑1, 36CH,108CH,20CH‑2 to match simple or advanced console workflows.

Q4: What power and signal connectors does this wash‑beam moving‑head use?

A4: Power‑Twist in‑out for daisy‑chaining power;5‑pin XLR DMX input and output connections.

Q5: What dimming and shutter performance is built‑into this unit?

A5: Smooth 0‑100 % electronic dimming; electronic shutter adjustable within 0‑20Hz for strobe effects.

Q6: Is this moving‑head suitable for outdoor event applications?

A6: IP20 rating for indoor‑only usage; it cannot resist water splash or outdoor moisture exposure.

Q7: What physical weight data for rental packing and truss load calculation?

A7: Net weight 8KG, gross shipping weight 9KG for logistics and truss‑load evaluation.

Q8: Can I adjust fixture setting without DMX lighting console?

A8: Yes, local rear‑mount LCD panel supports address setup, mode switch and manual test functions.