150W Spot LED Moving‑Head

150W Spot Moving‑Head Light,16‑Bit Correction Spot Light,Static‑Rotating Gobos For Live‑Show Production

This 150w spot led moving head is projection‑grade spot moving‑head fixture built for wedding rental crews, corporate‑event technicians and global rental fleets. Rated max 170W power consumption, it adopts high‑brightness 150W spot LED source. Optical group includes 7‑position color wheel,7 static gobos plus open,6 rotating gobos plus open,bi‑directional rotating 3‑facet prism and frost diffusion filter. It delivers 16‑degree beam angle with mechanical lens focus. 16‑bit electronic correction supports 540° pan and 270° tilt movement. It works under 16‑channel DMX with native RDM remote management, 0‑100% smooth dimming,0‑20Hz adjustable strobe and built‑in overheat‑protection. Supported working modes:DMX512, MASTER‑SLAVE, AUTO‑RUN. Local LCD display completes parameter setup. IP20 rating, AC100‑240V universal mains input for indoor‑only deployment.

Many Wedding And Corporate‑event Rental Technicians Meet Common B‑end operational headaches. Many entry‑level spot moving‑heads only carry one single gobo wheel, separating static pattern and rotating animation effects needs two separate spot units and raises rental inventory cost. Some competing spot fixtures omit RDM function, forcing crews to physically access truss‑hung fixtures to modify configuration data. Units without hardware‑level overheat‑protection may suffer premature component failure under continuous multi‑hour wedding and corporate‑event runtime. Low‑cost spot models lack independent frost filter, users cannot switch between sharp hard‑edged gobo projection and soft diffused atmosphere output quickly. The 150w spot led moving head Addresses Flexible Projection‑lighting Demands With Dual‑gobo Optical‑kit,Native RDM Remote‑access And Overheat‑safe Circuit For Wedding‑banquet,Corporate‑event And Small‑live‑show Performance Workflows.shop‑category‑led‑moving‑head‑fixtures

Optical & Mechanical Highlights Of The 150W Spot Led Moving Head

At Optical Core, The 150w spot led moving head Uses Dedicated 150W High‑brightness Spot LED As Primary Light Engine. Its complete optical assembly integrates 7‑position color wheel,independent static‑gobo wheel,rotating‑gobo wheel,bi‑directional 3‑facet prism and dedicated frost diffusion filter. Mechanical focus fine‑tunes pattern sharpness for different projection distances. 16‑bit electronic pan‑tilt correction suppresses motor stepping drift, keeping projected patterns stable through hours of non‑stop show playback.

Operators can toggle among crisp gobo logo projection,kaleidoscopic prism beam and soft frost‑diffused wash atmosphere freely. 0‑100% linear dimming and variable 0‑20Hz strobe expand scene creation choices for solemn wedding ceremonies and energetic party segments. Built‑in overheat‑protection monitors inner temperature to prevent damage during heavy‑duty rental cycles.

This Unit Is IP20 And Strictly Intended For Dry Indoor‑Only Deployment. Overhead Truss Installation Needs Secondary Anti‑Fall Safety Rope For Fall‑Prevention Protection. Wide AC100‑240V Input Fits Worldwide Indoor Venue Power‑supply Standards.

Control & Field Deployment For The 150W Spot Led Moving Head

Optimized fixed 16‑channel DMX assignment balances channel‑count consumption and full‑feature control, offering separate parameters for color selection,static‑rotating gobo control,prism rotation,frost,focus,dimming,strobe and pan‑tilt movement. Integrated RDM function lets technicians adjust fixture parameters and read runtime status remotely from lighting console, no truss climbing required. Beyond DMX512 console‑driven Workflow, MASTER‑SLAVE Linkage Achieves Synchronized Multi‑unit effect output. AUTO‑RUN Cycles internal preset sequences without external lighting controller. Onboard LCD display provides intuitive local parameter modification. Standard XLR‑3P signal ports simplify multi‑unit daisy‑chain wiring layout.

For Rental‑house Spot‑moving‑head‑fixture Inventory Expansion And Wedding‑corporate‑event‑live‑show‑venue‑upgrade‑projects, This 150w spot led moving head Delivers Multi‑mode Projection Visuals,RDM Remote‑access And Drift‑resistant 16‑bit Motion Control. It Supplies B‑End Lighting Professionals A Versatile Spot‑projection Solution For Wedding‑banquet,Corporate‑event And Small‑live‑show Indoor Productions.

Input power:AC100-240V 50/60 Hz
Power consumption :170W
LED source: 1*150W LED
DMX channel:16 channels
Pan scan：540°(16bit) Electric correction
Tilt scan：270° (16bit) Electric correction
Color wheel: one color wheel, 7 kinds of color chips in one color wheel
Static Gobo: 7gobos+open
Rotation Gobo:6 gobos+open
Beam angle:16 degree
Effect Wheel: one Rotation three-faced prism
Frost
RDM function
Effect move ，Bi-directional rotation
Lens optical system mechanical focus
Control mode:DMX512/Master-Slave/Auto run
Over heat protection
Dimmer : 0- 100 %
Strobe:0-20 HZ
Display:LCD display

Q1: Light‑source specification and power consumption?

A1:150W spot LED source;max 170W total power draw for indoor‑only operation.

Q2: Optical configuration and movement parameters?

A2:16‑degree beam angle,7‑color wheel,7 static &6 rotating gobos,3‑facet bi‑rotate prism plus frost filter;540° pan 270° tilt with 16‑bit electronic correction.

Q3: What special protection and control features are built‑in?

A3:Native RDM remote management,overheat protection,0‑100% dimming and adjustable 0‑20Hz strobe output.

Q4: DMX‑channel setting and supported working modes?

A4:Fixed 16‑channel DMX profile;DMX512,MASTER‑SLAVE,AUTO‑RUN working modes.

Q5: What real‑world value does RDM bring for rigging technicians?

A5:RDM allows remote reading status and editing DMX address without climbing truss for high‑mounted spot fixtures.

Q6: What can operators adjust on the onboard LCD menu?

A6:DMX address setup,pan‑tilt invert,focus calibration,run‑mode selection and factory reset.

Q7: Which supply voltage fits global indoor venue power grids?

A7:Wide‑range AC100‑240V universal input compatible for multi‑region indoor venue power supplies.

Q8: Safety notes for overhead truss suspension?

A8:IP20 indoor‑only deployment;truss mounting requires secondary anti‑fall safety rope for hazard prevention.