15W RGB Animation Laser Projector,40KPPS 50°Scanner,IP51,DMX512 18/25CH for Stage & Event Lighting Shows

15W Professional Animation Laser Light,Master‑Slave,SFS Fail‑Safe Protection for Large‑Scale Performance Venues

This 15W RGB animation laser projector is professional‑grade indoor stage‑laser lighting hardware built for live‑stage performances, club venues and large‑scale event shows across Europe and North America. Optimized for event‑rental cycles and permanent indoor installations, this high‑power laser fixture delivers rich animated graphic and beam visuals with high‑precision optical hardware and comprehensive safety mechanisms for lighting professionals.

It adopts 30KHz analog‑modulate RGB laser module. Red, green and blue laser outputs reach 4000mW, 4000mW and 7000mW respectively. The beam diameter is below 5.5 mm with divergence less than 1.3 mrad, maintaining sharp laser spots for long‑distance projection effect. The high‑quality optical scanner supports 40KPPS ILDA speed at 8‑degree angle and maximum 50‑degree scanning range, with 8×14 mm XY mirror to accommodate maximum 5.6×5.6 mm laser spot for smooth animated patterns.

The fixture reaches IP51 protection grade for indoor‑use dust‑resistance. It runs reliably within‑30 °C to 40 °C temperature range, adapting to cold‑climate indoor venues in Northern Europe and high‑temperature crowded club environments in Southern Europe. Rated power is 300W with universal AC90‑250V 50/60Hz wide‑voltage power input compatible with most European and United States power‑grid standards.

Diversified working modes satisfy various on‑site project requirements: ILDA PC software control, DMX512 (18‑channel / 25‑channel), TF‑card PRG and ILD offline playback, sound‑active trigger, auto‑play, outdoor preset mode and master‑slave multi‑unit synchronization. It is equipped with 3‑pin XLR DMX port, DB25‑ILDA and RJ45‑ILDA interfaces. RJ45‑ILDA brings convenient long‑distance wiring choices for large‑scale show projects.

Complete intelligent safety configurations are embedded for high‑power laser risk prevention. SFS scanner fail‑safety control, physical laser key‑switch, laser remote interlock and flying‑ring hoisting‑bolt are all reserved. When scanner malfunction occurs, SFS function automatically cuts laser output to avoid dangerous static single‑beam.

Weighing 12.2 kg with dimension 355×220×185 mm, the compact body supports truss hoisting installation. Users must strictly apply this fixture for indoor‑only scenarios and follow local laser‑safety regulations. With high‑precision scanning hardware, flexible multi‑mode control and full safety‑protection design, this 15W RGB animation laser projector is a trustworthy lighting solution for stage‑rental companies and system integrators throughout Europe and North America.

Features
1.Full pure diode laser with more stable performance and longer working life. Diode solid-state (DSS) laser is that when power on, the diode will have laser output directly. It can work properly between -30°C and 40°C.
2.Made of analog laser modulation. Users can dimmer the laser brightness linearly to makes the laser light more colorful.
3.Graphics & Effects: Beam show and animated graphics show patterns.
4.TF Card: 8GB, for storage build in program and downloading program.
5.Safety intelligent: PC control mode will shut off laser automatically without trigger signal. The scanner failure protection will shut off the laser signal automatically, so as to avoid the single beam coming out.
6.Applicable for all kinds of large-scale outdoor performances, outdoor lighting projects.

Technical Specification
1.Voltage: AC90~250V/AC, 50HZ/60HZ
2.Rated Power: 300W
3.Waterproof Level: IP51
4.Work Environment: Indoor, -30 °C ~40 °C
5.Scanner:
The highest quality of optical scanner, high speed and high precision, high stability and long life design.
40KPPS ILDA @8°. Max scanning angle is 50°. Signal input voltage ±5V
XY Mirror 8*14mm, maximum accommodate laser spot: 5.6 (W)*5.6(H) mm
6.Laser: RGB analog modulate, 30KHZ frequency
15W: Red laser 4000mW @ 638nm. Green laser 4000mW @ 525nm. Blue laser 7000mW @ 440nm
7.Beam Diameter<5.5mm, Divergence<1.3mrad
8.Working Modes: ILDA mode (PC Control), DMX512 (18 CH/25CH), PRG(TF card program), ILD(TF card program), SOUND(Sound Active) Mode, AUTO Mode, Outdoor Mode, Master/Slave
9.TF Card Play Program Format: .ild laser show document
10.Safety Configure: Security protection, Laser key switch, laser remote interlock, SFS Control(scanner fail safety control ON/OFF), flying rings bolt
11.Interface: 3 pins XLR jack for DMX, DB25 and RJ45 interface for PC control
12.Machine dimension: 355(L)*220(W)*185(H)mm
13.Machine Weight: 12.2Kg

Q1: What are the scanner parameters of this 15W RGB laser projector?

A1: 40KPPS ILDA @8°, maximum scanning angle 50°, XY mirror size 8*14mm for stable pattern output.

Q2: What laser‑modulation and beam specs does this fixture adopt?

A2: 30KHz analog RGB modulation; beam diameter＜5.5mm, divergence＜1.3mrad for long‑distance projection.

Q3: What DMX channel options and control interfaces are available?

A3: DMX512 18CH /25CH; interfaces include 3‑pin XLR DMX, DB25‑ILDA and RJ45‑ILDA ports.

Q4: What file formats can be played via TF‑card offline playback?

A4: It supports standard .ild laser‑show documents under PRG and ILD TF‑card playback modes.

Q5: What safety‑protection hardware is built‑in this high‑power laser projector?

A5: SFS scanner fail‑safety control, laser key‑switch, remote interlock and flying‑ring hoisting bolt.

Q6: What indoor working‑temperature and protection grade does it have?

A6: IP51 protection level; stable indoor working temperature from‑30℃ to 40℃.

Q7: What are the available working modes for on‑site operation?

A7: ILDA‑PC control,DMX512,TF‑card PRG/ILD,Sound‑Active,Auto,Outdoor‑Mode and Master‑Slave.

Q8: What is power‑supply requirement for this 15W animation laser projector?

A8: Universal AC90‑250V 50/60Hz input, rated power 300W, fits European and US power grids.