18X20W RGBW 4IN1 IP66 LED PAR CAN

IP66 RGBW LED PAR CAN,Fan‑Cooled,Multi‑DMX Modes For Facade Uplighting Projects Festival Touring Productions

This 18x20w rgbw 4in1 ip66 led par can is robust focused‑beam waterproof PAR wash fixture built for rental crews, event technicians and global touring‑rental fleets. Equipped with eighteen pieces of 20W RGBW 4‑IN‑1 LED sources, total 360W power consumption, 20‑degree fixed beam angle and 30000‑hour LED lifespan. Four selectable DMX channel profiles:4CH/6CH/7CH/10CH. Supported operation modes cover DMX512, RDM, MASTER‑SLAVE and STAND‑ALONE. Onboard LED display for quick local menu adjustment. High‑strength black die‑cast aluminum alloy housing with fan cooling system, IP66‑rated. Operating ambient temperature spans ‑20℃ to 45℃, supports standing and hanging mounting. Power daisy‑chain max 6units@100V,12units@240V;DMX signal chain maximum 32 fixtures for sheltered‑outdoor and indoor deployment.

Many rental operators and event integrators face practical B‑end obstacles. Conventional outdoor PAR fixtures only support basic DMX operation without RDM remote diagnostics, forcing technicians to climb trusses to adjust parameters. Many competing waterproof PAR units deliver wide diffuse beams and cannot create focused targeted wash zones for stage backdrop highlighting. The 18x18w rgbw 4in1 ip66 led par can addresses these real‑world lighting challenges with IP66‑rated focused‑beam RGBW wash hardware for sheltered‑outdoor and indoor event workflows.shop‑category‑ip66‑rgbw‑led‑par‑can‑stage‑lights

Optical & Mechanical Highlights Of The 18X20W RGBW 4IN1 IP66 LED PAR CAN

At optical core, the 18x20w rgbw 4in1 ip66 led par can integrates eighteen high‑power 20‑watt RGBW 4‑IN‑1 LED chips. Its fixed 20‑degree beam delivers concentrated, targeted colored illumination, ideal for highlighting backdrops, stage props and architectural feature zones.

Constructed from heavy‑duty die‑cast aluminum alloy, the fixture uses active fan cooling to stabilize internal temperature under continuous‑run rental cycles. Wide working temperature window covers ‑20℃ to 45℃, adapting cold outdoor night festivals and hot temporary event‑site environments. IP66‑rated housing resists dust and high‑pressure water jets; operators must avoid long‑term water submersion. Two practical mounting choices are available: ground standing placement or overhead truss hanging.

Control & Field Deployment For The 18X20W RGBW 4IN1 IP66 LED PAR CAN

Four switchable DMX channel profiles satisfy different programming‑depth requirements. Simplified 4‑channel mode delivers ultra‑fast venue setup for basic party shows. Higher‑channel modes unlock refined RGBW color‑mixing adjustments for sophisticated live‑show creative workflows.

Beyond standard DMX512 console control, built‑in RDM protocol enables remote reading and editing of fixture parameters without truss access. MASTER‑SLAVE synchronizes multi‑unit outputs, while STAND‑ALONE runs pre‑programmed color sequences without external controllers. On‑board LED display allows local onsite configuration.

Field crews must strictly follow published daisy‑chain quantity limits for power and DMX signal. Power loop supports maximum 6 fixtures under 100V input and 12 fixtures under 240V input; DMX signal chain cannot go over 32 connected units.

For rental‑house focused‑beam outdoor wash‑light inventory expansion and venue‑upgrade‑projects, this 18x20w rgbw 4in1 ip66 led par can delivers targeted 20‑degree beam optics, RDM remote management capability, multi‑grade DMX and IP66‑grade protection. It provides B‑end lighting professionals a robust waterproof PAR‑CAN lighting solution for wedding, festival and sheltered‑outdoor live‑event productions.

Lifetime of light source: 30000hrs
Operating voltage: AC100-240V 50/60Hz
Power consumption: 360W
Fuse: F3AL250V
Light source: 18*20W RGBW 4in1
Control mode: DMX512,Master/Slave,Stand-alone,RDM
DMX channel: 4CH/6CH/7CH/10CH
Beam angle: 20°
Maximum number of devices in a power supply chain: 6units@100V，12units@240V
The maximum number of devices in a DMX chain should not exceed 32 units.
Ambient temperature: -20℃~45℃
Dimensions: 299*224*293mm
N.W: 7.5Kg
IP rating: IP66
Cooling system: fan cooling
Housing material: high-intensity die casting aluminum alloy
Color: black
Installation: standing/hanging
Display elements: Led display

Q1: Light‑source configuration,power consumption and IP grade?

A1:18×20W RGBW 4‑IN‑1 LED;360W total power;30000‑hour LED lifespan,IP66 rated for sheltered‑outdoor use.

Q2: Beam‑angle value and available mounting selections?

A2:Fixed 20‑degree beam angle;dual‑mount options for ground standing or overhead truss hanging.

Q3: Available DMX channel modes and supported operation protocols?

A3:DMX modes:4CH,6CH,7CH,10CH;Protocols:DMX512,RDM,MASTER‑SLAVE,STAND‑ALONE.

Q4: What are daisy‑chain limits for power supply and DMX signal?

A4:Power chain max 6units@100V,12units@240V;DMX signal chain shall not exceed 32 fixtures.

Q5: What temperature operating range can this waterproof PAR CAN endure?

A5:Operating ambient temperature ranges from ‑20℃ up to 45℃ for variable outdoor venue climates.

Q6: What housing material and cooling design does this fixture adopt?

A6:High‑intensity black die‑cast aluminum alloy housing equipped with built‑in active fan cooling.

Q7: What convenience does onboard LED display bring for field technicians?

A7:Adjust DMX address,channel‑mode and effect settings without connecting an external lighting console.

Q8: Which event‑types suit this focused‑beam waterproof PAR CAN best?

A8:Mobile‑DJ gigs,wedding ceremonies,nightclub bars,music‑festivals,building‑facade‑lighting and touring‑rental projects.