4‑Head RGB Animation Laser,20KPPS,Array Line

Cost‑Effective 4‑Head RGB Laser,~100 Built‑in Patterns,Red‑Green‑Blue Beams,Family Party Stage Effect

This 4 head rgb animation laser is a compact indoor laser‑effect fixture built for family parties, nightclubs and global touring‑rental fleets. It packs four independent RGB laser heads into one economical housing, giving users the effect of four separate laser units from a single purchase. Around 100 built‑in laser patterns and beam effects are pre‑programmed, supporting both synchronous and combined effect modes. Equipped with a 20KPPS scanner offering ±20‑degree projection angle, red 100mW×4, green 80mW×4 and blue 250mW×4 laser diodes with divergence below 1.2mrad. It supports 12‑channel DMX512, sound‑active, auto and master‑slave modes under IP51 dust‑proof protection. Safety includes laser key switch and remote interlock, powered by AC100‑250V 50/60Hz, dimension 650×180×100mm and net weight 6.0kg.

For rental operators and small‑venue integrators, traditional single‑head animation lasers force users to buy and rig multiple separate units just to build a wide, layered laser effect. That approach multiplies truss payload, cabling work and overall hardware cost, especially for family parties, bars and compact nightclubs where budget and rig space are tight. The 4‑head rgb animation laser solves this real‑world pain‑point by condensing four independent laser outputs into one lightweight indoor fixture. shop‑category/multi‑head-rgb-animation-lasers

Optical & Mechanical Strengths of the 4‑Head RGB Animation Laser

At its optical core, the 4 head rgb animation laser integrates four discrete RGB laser heads, each contributing red, green and blue beams: red 100mW×4 at 638nm, green 80mW×4 at 532nm and blue 250mW×4 at 450nm. Because all four heads work together, a single unit produces the wide, multi‑beam projection effect that would normally require several single‑head laser machines. Beam divergence stays below 1.2mrad, keeping laser spots tight and sharp even at mid‑to‑long projection distances inside typical indoor venues.

Around 100 built‑in laser patterns and beam effects are pre‑stored in the unit’s memory. Both synchronous effects, where all heads play the same pattern together, and combined effects, where each head runs different elements to form one layered scene, are available. This rich onboard library lets operators deliver an engaging show quickly without heavy PC‑based programming, which is valuable for fast‑turnaround rental jobs. The generous projection angle further expands usable coverage, meaning one fixture can fill more wall or ceiling area than a standard single‑head laser, improving cost efficiency per rigged unit.

The housing adopts IP51 dust‑proof protection, preventing dust particles and fog‑machine oil from entering the optical cavity. This protection is particularly meaningful in bars and clubs that rely on haze and smoke machines, since oil‑laden atmosphere is one of the main causes of premature laser‑optical failure. By blocking contaminants, the fixture prolongs laser service life and reduces routine cleaning and maintenance overhead for rental stock.

Control & Safety‑Features for the 4‑Head RGB Animation Laser

Flexible control paths cover different onsite needs. The 4 head rgb animation laser accepts standard 12‑channel DMX512, letting lighting consoles control pattern selection, rotation, colour and drawing modes for precise show programming. Beyond console control, sound‑active mode reacts to music rhythm through the internal microphone, auto mode cycles through built‑in programs without external controller, and master‑slave mode links multiple units into a synchronized rig for wider installations.

Because this is a Class 3B/4 laser product, safety hardware is mandatory. The fixture includes a physical laser ON‑OFF key switch, a laser remote interlock terminal that must be closed before emission, and flying‑ring bolts for secure mounting. It runs on wide‑range AC100‑250V, 50/60Hz input, fits a compact 650×180×100mm chassis and weighs just 6.0kg, simplifying transport and truss‑load planning. Operators should always comply with local laser‑safety regulations, keep beams above the audience and avoid direct eye exposure.

For rental‑house laser inventory expansion and compact club, bar and family‑party venue projects, this 4 head rgb animation laser combines four‑beam output, a large built‑in effect library, IP51 dust‑proofing and multi‑mode control in one cost‑effective indoor fixture. It gives B‑end lighting professionals a practical, low‑maintenance multi‑laser solution without the expense and rig‑space burden of stacking several single‑head units.

◆Features:
4 head RGB animation laser. One laser equals 4 lasers. High cost-effective.
Around 100 laser patterns and beam effects built-in. It has both synchronous effects and combined effects.
Dust proof designs. IP rate is IP51. Can prevent the dust and fog machine oil into machine. Prolong the laser life and reduce the maintenance costs.
Big projection angle designs. Buy 1 laser to get multi-laser units effects.
◆Play Mode: DMX512 (12 channels), Sound active, Auto, Master/Slave
◆Scanner: 20KPPS ±20°
◆Laser Power:
Red Laser: 100mW*4PCS 638nm
Green Laser: 80mW*4PCS 532nm
Blue Laser: 250mW*4PCS 450nm
◆Divergence:<1.2mrad
◆Safety: Laser ON-OFF switch, laser remote interlock, flying rings bolt
◆Power: 100~250V，50/60HZ
◆Application: Family party, club, laser show, etc.
◆Light size: 650*180*100 (H)mm
◆N.W: 6.0Kg

Q1: How many laser heads and what colour‑beam configuration does this unit have?

A1: Four RGB laser heads:red 100mW×4@638nm,green 80mW×4@532nm,blue 250mW×4@450nm.

Q2: What scanner performance and built‑in effect‑library quantity?

A2: 20KPPS scanner with ±20° projection angle;around 100 pre‑programmed laser patterns & beam effects.

Q3: What are the available control modes and DMX channel count?

A3: 12‑channel DMX512, sound‑active, auto and master‑slave synchronization modes.

Q4: What protection rating and maintenance advantage come from this design?

A4: IP51 dust‑proof rating blocks smoke‑machine oil and dust,protecting optical parts to prolong laser life.

Q5: What core safety devices are included on this laser fixture?

A5: Physical laser ON‑OFF switch,laser remote interlock and flying‑ring bolts for secure rigging.

Q6: What power‑input range, dimension and net‑weight?

A6: AC100‑250V,50/60Hz;size 650×180×100mm;net weight 6.0kg.

Q7: What application‑scenarios suit this 4‑head rgb animation laser best?

A7: Family parties,clubs,bars,DJ laser shows,indoor commercial displays and touring‑rental events.

Q8: Can this multi‑head laser replace several single‑head laser units?

A8: Yes,its four‑beam output with synchronous/combined effects delivers multi‑laser visual richness from one compact cost‑effective unit.