IP61 Class4 RGB Animation Laser Projector,40KPPS 50°Scanner,11/31/61CH DMX512 for Stage & Outdoor Light‑Show Projects

High‑Precision Animation Stage Laser,Multi‑DMX Channel Options for Large‑Scale Performance & Landscape Lighting

This IP61 high power RGB animation laser projector is professional‑grade Class‑4 laser lighting hardware built for club venues, live‑stage performances and outdoor landscape light‑show projects across Europe and North America. Optimized for event‑rental cycles and qualified outdoor fixed installations, this laser fixture delivers rich animated graphic and beam visuals with high‑precision optical hardware and comprehensive safety mechanisms for lighting professionals.

It adopts practical two‑layer mechanical housing with IP61 dust‑proof rating, resisting dust and lampblack pollution. The unit runs reliably within‑30 °C to 40 °C temperature range, adapting to cold‑climate outdoor projects in Northern Europe and high‑temperature indoor club environments in Southern Europe. Rated power reaches 300W with universal AC100‑250V 50/60Hz wide‑voltage power input compatible with most European and United States power‑grid standards.

Equipped with 50KHz analog‑modulate RGB laser modules, red, green and blue outputs reach 5500mW, 6000mW and 10000mW respectively. Beam diameter stays below 6.0 mm with divergence less than 1.0 mrad, maintaining sharp laser spots for long‑distance projection. The laser light source provides more than 10000‑hour service life, lowering component‑replacement frequency for long‑term commercial projects.

The high‑quality optical scanner supports 40KPPS ILDA speed at 8‑degree angle and maximum 50‑degree scanning range for smooth animated pattern rendering. Multiple working modes satisfy various on‑site project requirements: ILDA PC software control, DMX512(11/31/61 channels), TF‑card PRG and ILD offline playback, sound‑active trigger, auto‑play, dedicated outdoor mode and master‑slave multi‑unit synchronization.

Interfaces include 3‑pin XLR DMX port, DB25‑ILDA and RJ45‑ILDA ports. RJ45‑ILDA adopts common network cable and realizes 300‑meter long‑distance signal transmission without attenuation, simplifying field wiring for large‑scale outdoor shows. Three selectable DMX channel modes meet basic to advanced custom‑laser‑show programming demands.

Complete intelligent safety configurations mitigate Class‑4 laser risks. SFS scanner fail‑safety control, physical laser key‑switch, laser remote interlock and flying‑ring hoisting‑bolt are equipped. When scanner malfunction occurs, SFS function automatically cuts laser output to avoid dangerous static single‑beam. Weighing 18.5 kg with dimension 405×285×190 mm, this fixture supports truss hoisting installation. Operators must strictly follow local Class‑4 laser‑safety regulations. With stable hardware, multi‑mode control and full safety‑protection design, this RGB animation laser projector is a trustworthy lighting solution for rental companies and system integrators throughout Europe and North America.

Voltage: AC100~250V/AC, 50HZ/60HZ
Rated Power: 300W
Waterproof Level: IP61
Work Environment: outdoor and indoor, -30 °C ~40 °C
Scanner:
The highest quality of optical scanner, high speed and high precision, high stability and long life design.
40KPPS ILDA @8°. Max scanning angle is 50°. Signal input voltage ±5V
Laser: RGB analog modulate, 50KHZ frequency
Red laser 5500mW @ 638nm.
Green laser 6000mW @ 525nm.
Blue laser 10000mW @ 440nm
Beam Diameter<6.0mm, Divergence<1.0mrad
Laser level: Class 4 laser
Laser life: >10000 hours
Working Modes: ILDA Mode (PC Control), DMX512 (11CH/31CH/61CH), PRG Mode, ILD Mode, SOUD(Sound Active) Mode, AUTO Mode, Outdoor Mode, Master/Slave
TF Card Play Program Format: ild laser show document
Safety Configure: Security protection, Laser key switch, laser remote interlock, SFS Control(scanner fail safety control ON/OFF), flying rings bolt
Interface:
3 pins XLR jack for DMX;
DB25-ILDA interface for PC control;
RJ45-ILDA interface for PC control (RJ45 cat cable is more convenient to get and wire than ILDA cable. There is no signal attenuation even after 300 meters transmission in the experiments)
Machine dimension: 405(L)*285(W)*190(H)mm
Machine Weight: 18.5Kg

Q1: What scanner specifications does this RGB laser projector adopt?

A1: 40KPPS ILDA @8°, maximum scanning angle 50°, input signal ±5V for smooth animated patterns.

Q2: What laser modulation and beam parameters are available?

A2: 50KHz analog RGB modulation; beam diameter＜6.0mm, divergence＜1.0mrad, laser lifespan＞10000 hours.

Q3: What DMX‑channel options can users select?

A3: Three switchable DMX512 modes:11‑channel,31‑channel and 61‑channel for different control‑precision demands.

Q4: What file format can be played via TF‑card offline playback?

A4: It supports standard .ild laser‑show documents under PRG and ILD TF‑card playback modes.

Q5: What advantages does RJ45‑ILDA interface bring?

A5: Uses common CAT5 network cable, supports up to 300‑meter transmission without signal attenuation.

Q6: What safety‑protection hardware is built‑in this Class‑4 laser fixture?

A6: SFS scanner fail‑safety, laser key‑switch, remote interlock and flying‑ring hoisting bolt.

Q7: What working‑temperature and protection grade does this unit have?

A7: IP61 dust‑proof grade; works stably‑30℃‑40℃ for qualified indoor and outdoor deployment.

Q8: What power‑supply specification does this stage laser fixture use?

A8: Universal AC100‑250V 50/60Hz input, rated power 300W, fits European and US power grids.