IP65 Cast‑Aluminum Art‑Net DMX‑RDM Converter,4 Universes 2048‑Ch,Isolated Ports for Stage Lighting

Bi‑Directional Outdoor Art‑Net‑DMX Gateway,RDM‑Compliant for MA Tiger‑Touch MADRIX Systems

This ip65 4 universe artnet dmx rdm converter is weather‑resistant bi‑directional ethernet‑to‑DMX signal gateway built for TV recording productions, live‑stage performances, theme‑park attractions and permanent architectural‑lighting installations across Europe and North America. Designed for professional lighting system integrators and touring rental crews, this hardware translates signals between Art‑Net ethernet protocol and physical DMX‑512 / RDM standard for lighting consoles and media‑based lighting software.

Single unit offers four Art‑Net universes which equal to total 2048 DMX channels. Thanks to integrated high‑speed zero‑latency ethernet switch, multiple gateways can be cascaded together for massive‑scale system expansion. The whole expanded system is capable of handling up to 32768 universes and 16777216 total channels for large‑venue projects. It supports bi‑directional Art‑Net, DMX‑512 and RDM protocols, realizing remote fixture configuration, status feedback and signal conversion in two directions.

All four DMX physical ports support independent configuration: users can set every port as signal input, signal output or disable status according to on‑site system layout. 100 % full electrical isolation is implemented among every input‑output interface. If short‑circuit or surge fault happens on one single port, other ports remain working normally without being affected. Each DMX channel is driven by independent driver circuit via waterproof 3‑pin XLR connectors, adapting damp outdoor installation environments.

Robust cast‑aluminum enclosure reaches IP65 ingress‑protection rating, delivering weather‑proof and UV‑resistant capability for semi‑outdoor and outdoor deployment. TFT display provides local menu operation for network parameters, universe mapping, port direction and language selection, and auto screen‑saver function helps extend screen service life. Wide‑range AC88‑256V 50‑60Hz power input fits different mains‑grid standards throughout European nations and United States. Physical dimension measures 225×145×74 mm with net weight 1.85 kilograms.

Even though IP65‑rated, this converter cannot be submerged under deep water. During installation, waterproof gasket must be correctly placed before tightening housing screws, and ventilation plug should be kept unblocked. It is widely compatible with mainstream professional lighting control hardware including MA console, Tiger‑Touch console and MADRIX software. Featuring zero‑latency switch, full‑port isolation and outdoor‑grade housing, this bi‑directional Art‑Net‑DMX‑RDM gateway is reliable signal‑interface hardware for complex large‑scale entertainment‑lighting projects throughout Europe and North America.

Supports 4 ArtNet universes, total 2048 channels
Use the Switch to connect multiple converters to expand the channel, which can control 32768 universes, a total of 16777216 channels
Ethernet I/O based on high speed switch, without linking delay.
Compatible with the following protocols: ArtNet, DMX 512 and RDM.
It is used for extending the DMX output port of Tiger touch, MA Console and MADRIX software.
The 4 DMX ports can all be configured as inputs or outputs.
100% electrical isolation between all in/outputs: problems on 1 port will not influence the other ports.
Independent Driver for each waterproof DMX 3-pin XLR.
Cast aluminum material, weatherproof, UV resistance and good applicability.
Wide input stable electric power supply, suitable for voltage * input of different countries.
Input Voltage: AC88-256V 50/60Hz
Dimension:225mm ×145mm × 74mm
Net Weight: 1.85Kg

Q1: How many Art‑Net universes and DMX channels per single unit?

A1: Each unit supports 4 Art‑Net universes, delivering total 2048 DMX control channels.

Q2: What is the maximum expandable capacity by cascading multiple converters?

A2: Multi‑unit expansion supports up to 32768 universes, 16777216 total controllable channels.

Q3: Does the internal ethernet switch bring signal‑transmission latency?

A3: High‑speed built‑in ethernet switch runs without link delay for real‑time lighting signal.

Q4: What lighting control systems is this converter compatible with?

A4: Works with MA console, Tiger‑Touch console and MADRIX lighting software.

Q5: Can I set each DMX port as either input or output signal direction?

A5: Yes, all four DMX ports can be independently configured as input, output or disabled.

Q6: What protection does full electrical‑isolation bring for multi‑port hardware?

A6: Fault occurring on one port will not interfere or damage other connected signal ports.

Q7: What enclosure grade and material for outdoor‑site deployment?

A7: IP65 cast‑aluminum housing, provides weather‑proof and anti‑ultraviolet performance.

Q8: Power‑supply and physical dimension specifications?

A8: AC88‑256V 50‑60Hz; dimension 225×145×74 mm; net weight 1.85kg.