IP65 Class4 Outdoor RGB Animation Laser Projector,>35KPPS 50°Scanner,FB4‑Support for Large‑Scale Outdoor Performance & Lighting Show

High‑Power IP65 RGB Stage Laser,RJ45‑ILDA 300m Transmission,Multi‑Safety for Permanent Outdoor Installations

This IP65 Outdoor DSS RGB Animation Laser Projector is Class‑4 professional‑grade laser lighting hardware specially built for large‑scale outdoor performances and municipal outdoor lighting projects across Europe and North America. Optimized for permanent outdoor fixed installation as well as large event‑rental cycles, this fixture combines heavy‑duty waterproof hardware, DSS solid‑state laser technology and comprehensive safety mechanisms for professional lighting integrators and rental companies.

Adopting multi‑layer IP65 multi‑waterproof‑structure housing, the whole unit provides full‑range dust protection and resistance against low‑pressure water jets from all angles. Fans, sockets, screws and other exposed components are manufactured with waterproof‑grade materials and special craftsmanship to maintain stable performance under complex outdoor weather conditions.

It is equipped with mature DSS pure‑diode RGB laser modules. Diode directly outputs laser after power‑on. The unit works reliably within‑30 °C to 40 °C, coping with cold‑climate outdoor projects in Nordic Europe and high‑temperature summer outdoor scenes in southern Europe. The laser source offers more than 10000‑hour working lifespan, lowering component‑replacement frequency for long‑term outdoor projects. It applies 30KHz analog RGB modulation for linear brightness dimming to achieve rich and layered color laser output.

The high‑quality optical scanner reaches over 35KPPS ILDA speed at 8‑degree angle with maximum 50‑degree scanning angle. Beam diameter is less than 7.0 mm while divergence is below 1.0 mrad, keeping sharp beam spots for long‑distance projection.

Diversified working modes satisfy complex project demands: BEYOND/QS, ILDA PC control, DMX‑512, Art‑Net and Autoplay offline playback. A built‑in 32GB TF‑card supports storing and loading standard .FB4 laser‑show documents. Interfaces include RJ45‑Ethernet, 3‑pin XLR DMX and RJ45‑ILDA port; RJ45‑ILDA realizes 300‑meter long‑distance transmission without signal loss, simplifying field cabling for large‑scale outdoor shows.

Multiple intelligent safety configurations mitigate Class‑4 laser risks. Switchable single‑beam protection together with physical shutter block, laser key‑lock, remote interlock and SFS scanner fail‑safety are equipped. The projector intelligently cuts laser output and closes shutter automatically under trigger‑signal loss or scanner‑failure conditions. Weighing 33 Kg, this fixture requires professional installation; operators must strictly follow local Class‑4 laser safety regulations. Featuring robust IP65 waterproof design, rich control options and full safety hardware, this DSS RGB animation laser projector is a trustworthy solution for large‑scale outdoor lighting projects throughout Europe and North America.

1.Water proof laser with IP65 rating designs. Multi-waterproof structure design. The housing reaches IP65 protection level (protection against dust and low-pressure jets of directed water for any angle).
2.Made of water proof materials and special process designs to make sure the exposed components (fans, socket, screws, etc.) working well.
3.Full pure laser with more stable performance and longer working life. Diode solid-state (DSS) laser is that when power on, the diode will have laser output directly. It can work properly between -30°C and 40°C.
4.Beam diameter <8mm, divergence <1.5mrad.
5.Made of analog laser modulation. Users can dimmer the laser brightness linearly to makes the laser light more colorful.
6.Operation interface: LCD display.
7.TF Card storage build in program and downloading program.
8.Safety Feature: Single beam protection and shutter protection system (ON and OFF selection choice. It is very important to have these safety function for high power laser), key lock.
9.Safety intelligent: PC control mode will shut off laser automatically without trigger signal. The scanner failure protection will shut off the laser signal and the shutter will block the laser output automatically, so as to avoid the single beam coming out.
10.Applicable for all kinds of large-scale outdoor performances, outdoor lighting projects.

Technical Specification
1.Voltage: AC90~250V/AC, 50HZ/60HZ
2.Rated Power: 800W
3.Waterproof Level: IP65
4.Work Environment: outdoor and indoor, -30 °C ~40 °C
5.Scanner:
The highest quality of optical scanner, high speed and high precision, high stability and long life design.
>35KPPS ILDA @8°. Max scanning angle is 50°. Signal input voltage ±5V
6.Laser: RGB analog modulate, 30KHZ frequency
Red laser 7W @ 638nm. Green laser 10W @ 525nm. Blue laser 15W @ 450nm
7.Beam Diameter<7.0mm, Divergence<1.0mrad
8.Laser level: Class 4 laser
9.Laser life: >10000 hours
10.Working Modes: BEYONG/QS, ILDA, DMX-512, Art NET, Autopaly
11.Graphics & Effects: Beam show and animated graphics show patterns
12.TF card: 32GB, build in program, and downloading program
13.Play Program Format: .FB4 laser show document downloading for BEYOND/QSS
14.Safety Configure: Security protection, Laser key switch, laser remote interlock, SFS Control(scanner fail safety control ON/OFF), flying rings bolt
15.Interface:
RJ45 Ethernet LAN port for BEYONG/QS;
3 pins XLR jack for DMX;
RJ45-ILDA interface for PC control (RJ45 cat cable is more convenient to get and wire than ILDA cable. There is no signal attenuation even after 300 meters transmission in the experiments)
16.Machine dimension: 560(L)*350(W)*220(H)mm

Q1: What is the protection grade and waterproof capability?

A1: IP65 multi‑waterproof‑structure housing, against dust and low‑pressure water jets from any angle.

Q2: What laser source and working‑temperature range does it adopt?

A2: DSS pure‑diode RGB laser, stable‑30℃‑40℃ operation; laser service life＞10000 hours.

Q3: What are the scanner core technical parameters?

A3: Over 35KPPS ILDA @8°, maximum scanning angle 50°, input signal ±5V.

Q4: What control modes and file formats are supported via TF‑card?

A4: BEYOND/QS,ILDA,DMX‑512,Art‑Net,Autoplay; 32GB TF‑card plays .FB4 laser‑show documents.

Q5: What advantages does RJ45‑ILDA interface bring?

A5: Uses common CAT5 network cable, supports up to 300‑meter transmission without signal attenuation.

Q6: What complete safety protection functions are built‑in?

A6: SFS scanner fail‑safety, shutter protection, key‑lock, remote interlock, fault‑triggered auto laser shut‑off.

Q7: What is laser configuration and beam parameter?

A7: 7W R /10W G /15W B; beam diameter＜7mm, divergence＜1.0mrad,30KHz analog modulation.

Q8: What power‑supply specification and weight does this fixture have?

A8: AC90‑250V 50/60Hz, rated power 800W; net weight 33Kg for outdoor fixed‑installation.